How often we need to clean furnaces

Posted on 07 September 2018 (0)

For people who are living in colder areas of the country, now is the best period to have some thoughts about their heating systems. The kind of technological advancement found in new furnaces nowadays doesn’t require so much work when setting them up for the winter season. Over a decade ago, we were always told to check our boilers and furnaces once annually. But now, electronic appliances do majority of the task. Just a few things are to be done by a service tech during the process of cleaning and checking today’s furnaces.

The old days:

In the past, whenever a service tech carries out a checks and cleaning, there are always different things he has to work out. First, he pulls out the burner and then blow them with carbon dioxide (co2), he then checks for cracks (with a mirror) around the medium that exchanges heat. After that, he’ll vacuum up the dirt. He’ll also change the “thermocouple” on the “pilot light” and blow dirt out of the pilot light assembly to guarantee a clean burn and that the pilot light is positioned properly on the burner pilot runner and the thermocouple. After doing this, the service man pulls the blower, if it happens to be a blower driven by belt, then add some to the motor and squirrel cage bearings, and then check around the belt for likely cracks. If it were a “direct drive blower”, he only has to oil up the motor bearings.

Now, a service man that is worth his salt will inspect the most vital part of a furnace which is the “limit switch”. There’s always a limit switch in all electric, gas, propane or oil furnace units. It turns the blower on and shuts it down, and its most important work is to force the “gas valve” to shut the burners down if the blower begins to malfunction. Another function is to prevent overheating of the furnace and causing a fire outbreak.

One of the last things a service man does is to examine the “flue pipe” just to ensure it hasn’t been jammed by birds or soot. It’s common to see dead birds in flue pipes. Some of the birds even make it to people’s basements. Fortunately, it doesn’t happen with new furnaces. And the final task on the list is to check it out for gas leakage.

Comparing the old furnaces to the new ones:

Today’s furnaces don’t require so much attention from a service tech like the furnaces used about 10 years ago. All that needs to be done on the modern furnaces is to examine the “flame sensors”. The burners rarely get dirty because they work mostly in closed areas. The circuit board controls the gas valve, blower, and the safety controls. The blowers in the new furnaces are well sealed now as well. They don’t require oiling!

So how often should you get your furnaces checked?

This depends greatly on the environment your furnace is used in. If it is used in an environment that has much dust, then you must check your furnace once, annually.

However, some tech guys think homeowners only have to check their furnaces when they are not functioning properly. Regardless of this, it’s left to the homeowner to decide how often they want to have their furnace checked.

Quick Steps to Refresh Your Home.

Posted on 01 June 2018 (0)

Ideas for upgrading your home can be curiously difficult to generate when you’re trying to stay within budget. We’ve done some research to make the decision easier for you when you do decide to make those changes.
A Fresh Lick of Paint: A new coat of paint can give your home a facelift. Following a DIY approach should help.
Low-cost Stair-Runner: If you run the risk of tripping down the stairs it might be a good idea to install a low-cost stair-runner which you can easily upgrade yourself.
Low-Energy Dishwasher: Installing an Energy Star-qualified dishwasher can help reduce costs to the home maintenance budget by cutting out more than 500 gallons of water.
Fine-Tuning the Essentials: You can refresh doors and cabinets with a good cleaner, sandpaper, paintbrush, elbow grease, and some paint without the costs associated with purchasing new ones.
Water-Filter: Buying bottled water can be quite an expensive endeavour if you’re trying to stay on a budget but a water filter can be an excellent cost-saving choice for when you decided to resort to tap water.
Get Mold To Go Away: It is for mold to appear in the bathroom for obvious reasons but you can prevent that growth with a bathroom vent fan to keep away expensive health problems.
Ceiling Fans and Air-conditioners: Whether its winter or summer a ceiling fan can be a handy asset. In summer it can help boost the air-conditioning capacity while in winter it can help redistribute the heating output more equitably. When it comes to your air-conditioners you should try to dust up the screen covering every so often to ensure that your appliance isn’t consuming more power than usual and that its internal machinery does not become damaged.

Toilet Tank Leaks: If you harbour the suspicion that your toilet tank may be leaking perhaps you should pour in some red food coloring into the tank (while it has water in it). If you make your inspection after another hour and you find that the water is pinkish then you have a water leak.
Refrigerators: Faulty fridge door seals can be a source of waste and this will reflect poorly on your energy consumption because your appliance would work even harder to keep food items frozen. It is best to stock up your fridge with foods as it then uses less energy to keep foods cool or frozen.


Posted on 23 April 2018 (0)

There are various types of heating system. The earliest type of heating system is the use of fire wood, open furnace in homes, etc. these types of heating are known as direct heating. Other types of heating are the mechanized form of heating. The heating system is designed to provide warmth for indoor spaces. Spending the night tossing and turning in a cold house is never a palatable experience. The heating system also prevents cases of people suffering from cold, catarrh, flu, etc. The risk of contracting air induced disease is greatly reduced or prevented through the installation of a heating system within a building.

In this article we would be highlighting the key general benefits associated with the heating and specific common types of heating system that can be installed in homes.

General Benefits of Heating System

  1. Provision of warmth: This the primary function of the heating system. The heating system is invented to provide man with warmth especially in a environment with extreme cold conditions. Spending the night tossing and turning in a cold house is never a palatable experience.


  1. Prevention of Cold Induced Diseases: It is common to find in homes where no heating system is installed or he heating system is busted, people who suffer from cold, catarrh, flu, etc. The risk of contracting air induced disease is greatly reduced or prevented through the installation of a heating system within a building.


  1. In insulated buildings, i.e. indoor spaces where heating system is installed, furniture in the living room or offices space are preserved from spoilage and depreciation as a result of molds and excess moisture in the air.


Top Benefits of Boiler Heating System

  1. It is a clean form of heating. Dust particles and other allergens are not produced in the boiler heating system. Heat in a boiler system is produced from the radiator into that is already presentation the atmosphere.
  2. With a boiler system, you can be guaranteed of a friendly and quality heat. The radiator from which heat in the boiler system is produced gives a fresh feeling.
  3. Another interesting perk about the boiler heating system is that it produces noise that can only be heard if one is in the boiler. The noise produced is restricted to being heard inside the boiler only.
  4. A boiler system can last for a very long time if maintained properly. Boiler heating system can last up to ten years. It only depends on regularity of service and maintenance to keep the system running.


Top Benefits of Central Heating System

  1. The central heating system is more permeable in the indoor space than any other kind of heating system. It can reach every corner allowing for proper distribution of the heat, thus providing adequate warmth.


  1. The central heating system is most suitable for large buildings, it can transport heat faster in different directions and also helps in keeping in shape the structural strength of the building.

Getting the best out of your HVAC system

Posted on 19 February 2018 (0)

HVAC systems are very important to us in this age. We require them to counteract adverse weather conditions and decide what exactly we want our internal atmospheric conditions to look like. HVAC systems do not come very cheap. They cost quite some money to procure, install and even maintain. It is important that we, therefore, get the maximum possible value from these systems that cost us so much to run. This post sets out some things you can do to ensure that you enjoy the use of your HVAC system as much as possible.
Learn about HVAC systems- The common saying goes that “knowledge is power” When you understand the workings of an HVAC system, you will be better able to use it effectively in a sustainable manner. We’re not suggesting that you buy textbooks or get a mechanical engineering degree (that may not be a bad idea though). But you can always pick up bits and pieces of knowledge through the internet- articles, blog posts and so on. Be sure to google any knotty topics you find difficult to understand and read comment sections of blogs and websites so as to learn from the experiences of other people.
Regulate Usage: This point will definitely help you to make your HVAC system last longer and also has the benefit of helping to cut your electricity costs. Regulated usage of HVAC systems includes turning off the system when you’re leaving home. Also, if the weather is considerably cooler, there’s no point turning on the air conditioner. It’s basic logic that the less you use your system, the longer it lasts.
Report faults early: This is also quite obvious. You don’t have to wait until the system gets damaged before consulting repairers. Schedule regular maintenance checks to help detect faults early. There’s always the temptation to allow minor faults slide since the system is still working fine and serving its purpose. However, it’s these minor faults that add up to become significant issues requiring major repairs or even a complete overhaul of the whole system. Like another popular saying goes: “A stitch in time saves nine”
Use the Internet of Things: If you’ve not heard about the Internet of Things, then refer to first point about learning. However, as a quick introduction; the internet of things can be described as a connected system of physical devices involving vehicles, electronics, sensors, actuators, software and so on. They are able to interact over the internet and share data. Internet of Things (popularly called IoT) has been very implemented in HVAC, allowing the use of mobile apps for the control of temperature, humidity and other features of HVAC system. Setting up an IoT system for your HVAC system will give you an unparalleled user experience. Fancy being able to turn off the air conditioner after you forgetfully left it on on your way to work. Care should actually be taken when using IoT to prevent internet security breaches.

more info

Reasons to hire a professional to install your HVAC system

Posted on 25 September 2017 (0)

Running a home comes with several responsibilities, maintaining and fixing the air conditioning system included. Are you thinking about replacing your HVAC system? When your system has issues, you have to make a decision to either replace the system yourself or to hire a professional to perform the replacement for you. Although it may seem to you that by doing the replacement yourself you’ll save much money, this is not always the case. You may end up spending more than you would have spent by hiring an expert in the beginning. Hiring an HVAC professional to take care of your system is your best course of action. Here are reasons why you need to hire a pro to install or repair your HVAC system.


Hiring a certified HVAC professional is the secure option to deal with your system. HVAC systems require safety measures when being handled because they utilize potentially dangerous gasses for proper functioning. Without proper training on how to handle the system components, you may not only harm yourself but also your household. Let a certified professional who understands the safety measures when handling blades, electrical wires and machinery take care of your system.


Time is money. You have many things on your to-do list that you need to take care of. Adding yourself the task of maintaining your HVAC system can be overwhelming. You may have to spend much time studying the instructions and gathering the required tools for the installation. Hiring an HVAC repair and installation professional will save you a lot of time. You will only need to fix a schedule with the expert as you continue with your other chores.

Peace of mind

Hiring a Spring Hill air conditioning repair expert will relieve you to stress of handling emergencies with your air conditioning system. HVAC systems don’t follow weather patterns to break down or stop working. It is distressful on the other hand when temperatures in your home become extreme. An HVAC expert will always be available anytime you need their services. You will have peace of mind assured of quality services from your HVAC specialist at any time.

Certified skills

HVAC system repair and installation requires proper knowledge and experience. Hiring a certified contractor is the best choice to make. Your system will be in your home for years and therefore if poorly installed, you will have costly repairs to take care of within no time. A certified expert always has proper training and experience that will make your system functions properly for a long time. The specific parts of your HVAC system require proper handling for the system to function properly, something you may not be able to successfully do on your own.